|
|
|
|
High Quality Tri-Seg-a-Tops
Electric Scooter
The Tri-Seg-a-Tops Electric Scooter is a simplified mobility scooter work-horse with a smooth ride. Excellent for warehouse applications, school/college campuses, shopping complexes, enclosed parking garages, security officers for patrol, or just about any application that you need silent (no emission) transportation. Even just for fun!
CALL NOW OR ORDER ONLINE
DIAL 1-866-606-3991
ORDER ONLINE NOW OR CALL 1-866-606-3991
CALL NOW OR ORDER ONLINE
DIAL 1-866-606-3991
CALL NOW OR ORDER ONLINE
DIAL 1-866-606-3991
CALL NOW OR ORDER ONLINE
DIAL 1-866-606-3991
CALL NOW OR ORDER ONLINE
DIAL 1-866-606-3991
ORDER ONLINE NOW OR CALL 1-866-606-3991
How to ride the Tri-Seg-a-Tops Scooter:
It is important that you understand how to operate the scooter, so carefully follow these steps:
1. Mount the unit and position yourself behind the handle bars with your feet resting on the floorboard.
2. Check that the brake is not locked. Squeeze it to disengage it if it were locked.
3. Turn the key to ON position (clockwise).
4. Check to see if the battery gauge is in the green zone.
5. Make sure that the speed direction switch (FWD/REV) is set to go forward or reverse depending on the direction that you want to go to.
6. Select the speed setting (Fast or Half Speed) as desired. We recommend that you begin using the Tri-Seg-a-Tops scooter only in half speed until you get acquainted with the unit and become proficient riding it.
7. Gradually apply the throttle until the desired speed is achieved. Once again, we recommend that you do not venture to full speed operation until you have become proficient with the scooter and only if you are certain that there are no obstacles in site on an open field.
8. Make sure to slow down your speed while turning and balance your weight to the opposite side of the turns to ensure the unit’s stability.
IMPORTANT NOTICE: The Tri-Seg-a-Tops’s microcomputer (controller) automatically cuts off power to the motor whenever the brake is applied. the motor regains power after a short pause after releasing of the brake. Likewise, if the brake is set to the lock position, drive is disabled. Make sure to release the brake before you apply the throttle.
If you are using the seat option, we strongly recommend that you do not use the FAST speed setting.
|
|
|
|
|
|
|
|
|